basmash.blogg.se

Viewsonic monitor driver vp930b-3
Viewsonic monitor driver vp930b-3















This entire setup worked fine previously with a Samsung 24" monitor for 1 yr + until a row of pixels gave up the ghost, hence the G2410 replacement.

  • Only unplugging the DVI and power cables so they are both disconnected at the same time, then plugging them back in, allows you to power up the monitor.
  • Unplugging and reconnecting the DVI does not allow you to power up the monitor.
  • Unplugging and reconnecting the power does not allow you to power up the monitor.
  • No buttons on the display are responsive, nothing is illuminated. 1 out of 3 times or so when I come in in the morning, I cannot power on the G2410. Usually at night I will power off the monitors manually via their buttons.

    VIEWSONIC MONITOR DRIVER VP930B 3 DRIVERS

    I'm running the latest drivers for both video cards. There is nothing plugged into the VGA port of the G2410. Loose or broken pins in the cable connector could cause an improper connection.I have a brand new G2410 running off of a GeForce 7200 GS chipset via DVI (as well as two Viewsonic VP930b's on the same machine - one on the 7200 GS (via VGA) and one via a GeForce 4 MX 440 (via VGA)). Check the connecting cable and make sure it is properly and securely connected.Adjust brightness and contrast via the OSD Menu.The external device is connected, but no image appears on the screen Some USB devices require a higher electric current connect the device directly to the computer.Try changing to another USB port (if applicable).Make sure the USB cable is connected properly.USB devices connected to the monitor do not work Make sure there are no obstructions near or on the monitor, and that there is adequate spacing.Make sure the volume is not muted, nor set to 0.If using ear-/headphones, ensure the mini stereo jack is connected.Adjust the ViewMode or the input source.Turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor.The OSD Menu does not appear on the screen/the OSD controls are inaccessible Make sure the "Blue Light Filter" is Off.Adjust the horizontal and vertical controls via the OSD Menu.Adjust the resolution to the correct Aspect Ratio.Check for bent or broken pins in the video cable connector.Adjust brightness and contrast settings via the OSD Menu.

    viewsonic monitor driver vp930b-3 viewsonic monitor driver vp930b-3 viewsonic monitor driver vp930b-3

    If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.Connect the monitor to another computer.Loose or broken pins in the cable connector could cause an improper connection. If any colors (red, green, or blue) are missing, check the video cable to make sure it is properly and securely connected.Make sure the correct input source is selected.Adjust the brightness and contrast settings.Make sure the video cable connecting the monitor to the computer is properly and securely connected.Power is "On", but no image appears on screen Plug another electrical device into the power outlet to verify that the outlet is supplying power.Make sure the power cord is properly and securely connected to the monitor and power outlet.Make sure you have turned on the monitor by pressing the Power button.Troubleshooting Common Problems Problem or Issue















    Viewsonic monitor driver vp930b-3